multidec®-MICRO TOOLS

The drilling and milling solution for
your micro-machining

Economical, process-safe and precise, even for materials which are difficult to machine.

With multidec®-MICRO TOOLS, UTILIS offers a new range of performance solid carbide micro tools for drilling, milling and milling TORX® forms. The range is divided into three parts: “u-drill”, “u-mill” and “u-hexalob ”. The multidec®-MICRO TOOLS range is constantly being expanded and extended.

You can download the multidec®-MICRO TOOLS prospectus as a PDF or order it via our E-Shop:


► DOWNLOAD THE PDF FILE

► ORDER THE PROSPECTUS

 

u-drill

Solid carbide micro tools, spot drills and twist drills

The “u-drill” range includes various spot drills and twist drills.
 

Overview:

  • 90° and 120° NC spot drills from Ø 1 to 6 mm

  • Solid carbide twist drills from Ø 0.3 to 1 mm in 0.05 mm steps available
    from Ø 1 in 0.1 mm steps up to Ø 3 mm available, in 3×d1 length with reinforced shank, self-centering shape

  • Solid carbide twist drill from Ø 0.1 to 0.29 mm in 0.01 mm steps available
    7×d1 version with reinforced shank, self-centering shape

  • Solid carbide twist drill from Ø 0.3 to 2.00 mm in 0.01 mm steps available
    from Ø 2.05 to 3.00 mm in 0.05 mm steps available, 5–8×d1 length version with reinforced shank, self-centering shape

 

► TO THE NC SPOT DRILLS

► TO THE TWIST DRILLS

 

u-mill

Solid carbide micro tools, end mills and ball nose end mills

Under the line “u-mill” you can find end mills and ball nose end mills.
 

Overview:

  • Solid carbide end mills from Ø 0.2 to 3.00 mm with center cut, as 2 and 3 teeth

  • Solid carbide ball nose end mills from Ø 0.3 to 3.00 mm, 0.75×d1 and 3×d1 length with center cut and without tooth pitch

 

► TO THE END MILLS

► TO THE BALL NOSE END MILLS

 

u-hexalob

Solid carbide micro tools for milling TORX® contours

The micro tools of the “u-hexalob” line are specially adapted to the individual TORX® depths and offer optimised geometry for machining stainless steel and titanium.
 

Overview:

  • Solid carbide pilot drills from Ø 0.90 to 3.90 mm for spotting and centering with a 120° chamfer

  • Solid carbide end mills with three teeth, from Ø 0.20 to 0.30 mm, usable length of 3.5×d1 and 5×d1 perfectly suited for milling a TORX® form

  • Solid carbide end mills with four teeth, from Ø 0.40 to 1.00 mm, usable length 3.5×d1 and 5×d1 perfectly suited for milling a TORX® form

 

► TO THE PILOT DRILLS

► TO THE END MILLS

 

CONTACT

Festim DZEMAILI
Technical Support multidec®
► festim.dzemaili@utilis.com
► Fon +41 52 762 62 17