multidec®-LUB

In today’s competitive environment, efficiency and process reliability count. multidec®-LUB makes a significant contribution to increasing the efficiency and process reliability of your sliding headstock machine.

The principle of integrated coolant is consistently implemented in this programme. UTILIS offers you, the user, two options for optimising your cooling.

The first option is a complete tool plate, consisting of a tool plate and clamping shims, in which the lubricant is directed through the tool plate and directly onto the cutting edge via the clamping shim. The second option is to replace the existing original clamping shims on your original tool plate with multidec®-LUB clamping shims, which also direct the lubricant directly to the cutting edge.

The first option is a little more complex, but has the great advantage that only one coolant connection to the tooling plate is required. The lubricant distributor and connecting hoses are completely eliminated.

With the second option, you keep your original tooling plate and simply replace the clamping shims with the multidec®-LUB models and connect them to your lubricant dispenser.
In our multidec®-LUB lubrication programme, a wide range of accessories is available for high and low pressure; lubricant distributors, hoses, screw connections and quick-connect couplings.
The great advantage of the UTILIS multidec®-LUB system is that you, as a customer, are completely independent and can use your existing inserts and insert holders.
Take advantage of these benefits and increase the performance of your machine.

 

TOOL PLATES COMPLETE

multidec®-LUB mould plate with an integrated coolant system, which can be quickly and easily replaced with the existing one.

► ACTUAL STANDING LIST – TOOL PLATES COMPLETE WITH INTERNAL COOLING

► ACTUAL STANDING LIST – TOOL PLATES COMPLETE SHIMS

 

Quick change system

Quick and accurate tool change due to adjustable stops in the tool plate.

Flow regulator on the clamping wedge

Targeted regulation of mould cooling with on/off function.

Two coolant outlets on the clamping wedge

Reduced tool wear due to focused cooling directly at the cutting edge. Thanks to the integrated coolant system, externally mounted coolant connections are completely eliminated.

Coolant connections on the panel

A wide range of connection options ensures direct connection to the coolant unit.

Advantages:

  • Easy installation by replacing the original plate with the multidec®-LUB tool plate completeSteigerung der Prozesssicherheit

  • Quick and safe tool change due to integrated stop

  • Die Werkzeughalter ohne Innenkühlung (IC) können weiter verwendet werden

  • No more coolant manifolds and hoses needed

 

CLAMPING WEDGES

The multidec-LUB clamping wedge directs the coolant precisely onto the tool cutting edge even at low pressure. The flexible stop makes a safe and quick change of cutting edges possible. The coolant supply in high and low pressure goes through a distributor block or directly into the multidec®-LUB clamping wedge.

► ACTUAL STANDING LIST – CLAMPING SHIMS

 

For high-pressure and low-pressure complete solutions, coolant distributors with 2 to 8 outlets, hoses in various designs and lengths as well as various screw fittings and quick couplings are available as accessories.

Advantages:

  • Easy installation by replacing the original tensioning wedge with the multidec®-LUB tensioning wedge
    Steigerung der Prozesssicherheit

  • Quick and safe tool change due to integrated stop

  • The tool holders without internal cooling (IC) can still be used

  • Various coolant distributors, hoses and push-in fittings for high and low pressure from the multidec®-LUB coolant system range are available